Език / Language

EDGE EVO® Solo ESHR40-L Networked Controller/Reader & Module

HID Global’s EDGE EVO® Solo ESHR40-L Controller/Reader and Module is a cost-effective, stand-alone, IP -enabled access control solution that is designed for sites with one or two doors in an indoor, non-monitored environment. Distributing intelligence right to the door, the single-door solution provides the ability to power all devices around a door using Power over Ethernet (PoE), significantly reducing total door installation costs by eliminating the need to install a separate power supply. It also utilizes less expensive CAT5 wiring compared to traditional structured cable.

The ESHR40-L is a single door controller/reader and module with native interfaces to one NC or NO lock. CAT-5 cable is routed directly to reader/controller located next to the door and an internal four-wire bus then connects the reader with module designed for installation in close proximity (e.g. behind reader in US-single gang box or in hollow door frame). The module connects the reader/controller to the lock. The ESHR40-L is ideal for securing a single non-monitored door located indoors that uses a traditional lock.

Key Features:

  • Supports a traditional NC or NO wet lock (1 output only)
  • Includes iCLASS® Reader for interoperability with iCLASS credential technology
  • Optimized for IT-savvy installations where smart switches disable network ports in case of tamper.
  • Manages up to 1000 cardholders/credentials.
  • Manages 8 schedules and 3 intervals each day.
  • Wet installation only, 12 or 24 VDC wet lock support (using FET)

The solution does not require additional software to be installed since it is equipped with an easy-to-use user interface provided through a standard web browser. The All-in-One Door Dashboard user interface enables the site administrator to add user information, modify access rights, pull history reports, monitor door activity and conduct general administration of the controller.

EDGE EVO Solo is built on HID Global’s OPIN® development platform and can be remotely reconfigured through the web browser from stand-alone operation to a system controller in a host environment of multiple controllers.

Technical specification

Model (and Part #):ESHR40-L (83120CKL000)
Mounting Holes - EHR40: US Single-gang and EU / APAC 60mm
Mounting Holes - ELM:Fits within US Single-gang or in hollow door frame
Dimensions - EHR40:3.3" W x 4.8" H x 1.2" D (83.9 mm x 122.2 mm x 30.5 mm)
Dimensions - ELM:2.9" W x 1.3" H x 0.7" D (73.0 mm x 32.0 mm x 19.0 mm)
Weight - EHR40:6.3oz (180g)
Weight - ELM:4.9oz (140g)
Operating Temperature:32° to 122° F (0° to 50° C)
Operating Humidity:5% to 95% relative, non-condensing
Communication Ports:Ethernet (10/100), Hi-O CANbus
13.56 MHz Card Compatibility:13.56 MHz iCLASS HID Application, ISO14443A CSN
Warranty:Warrantied against defects in materials and workmanship for 18 months.
DC Input (MAX) @ PoE:14.4W (300mA @ 48VDC)
DC Input (MAX) @ AUX +12VDC:18W (1500mA @ 12VDC)
DC Input (MAX) @ AUX +24VDC:36W (1500mA @ 24VDC)
Supervised Inputs Power (MAX) :0.025W (5mA sink, 5V nominal) 0 to +5VCD Ref
DC Input @ PoE: 8W
DC Input @ AUX +12VDC:13.1W
DC Input @ AUX +24VDC:26.6W
Hi-O CANbus Output Voltage, DC Input = PoE:24VDC
Hi-O CANbus Output Voltage, DC Input = AUX:AUX +VDC