Език / Language

MiniProx® Hazardous Location 5365

  • Accepts 5 to16 volts, meeting most voltage requirements.
  • Available with Wiegand or Clock-and-data interface.
  • Allows easy upgrade from magstripe to a proximity reader; no rewiring or pulling of new cable required.
  • Offers high reliability, consistent read-range and low power consumption in an easy-to-install package.
  • Mounts directly onto metal with no change in read range performance.
  • Provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.
  • Rated Hazardous Locations Class I, Div. 2, Groups A,B,C,D.

The Hazardous Location MiniProx® provides the same features and dimensions as the MiniProx reader, with an incorporated junction box rated for use in hazardous locations. The junction box is attached to an appropriate surface location utilizing four holes.

Technical specification

Typical maximum* read range
  • ProxCard® II card - up to 5.5" (14 cm)
  • ISOProx® II card - up to 5" (12.5 cm)
  • ProxKey™ II keyfob - up to 2" (5 cm)
  • ProxCard® Plus card - up to 2" (5 cm)
  • SmartProx™ II card - up to 5" (12.5 cm)

*Depending on local installation conditions.

Dimensions6.0" x 1.7" x 1.0"
(15.2 x 4.3 x 2.54 cm)
MaterialPolycarbonate UL 94
Power supplyStandard MiniProx: 5.1-16 VDC
Haz. Loc. MiniProx: 5.1-16 VDC
Linear power supplies are recommended.
Current requirementsAverage: 40 mA (5 VDC); 50 mA (12 VDC)
Peak: 60 mA (5 VDC); 120 mA (12 VDC)
Operating temperature-22º to 150º F (-30º to 65º C)
Operating humidity0-95% relative humidity non-condensing
WeightWith terminal strip 3.5 oz. (99 gm)
With pigtail 3.8 oz. (108 gm)
Haz. Loc. MiniProx: 3.8 oz. (108 gm)
Transmit frequency125 kHz
Excite frequency125 kHz
  • Canada/UL 294 Listed: Access Control System Units
  • Canada/UL 1604 Listed (with Haz. Loc. junction box only): Hazardous Locations Class I, Div. 2, Groups A,B,C,D.
  • FCC Certification, United States
  • Canada Certification
  • CE Mark, Europe
  • UK Type Approval
  • Germany Type Approval
  • Australia C-Tick Mark
  • New Zealand EMC
Cable distance
  • Wiegand interface: 500 feet (150 m)
  • Clock-and-data interface: 50 feet (15 m)
  • Recommended cable is ALPHA 1295 (22 AWG) 5 conductor minimum stranded with overall shield or equivalent. Additional conductors may be required for LED or beeper control.