Език / Language

pivCLASS® RK40 reader

HID Global’s pivCLASS RK40 wall switch with keypad contactless reader is suitable for use in security areas meeting the FIPS-201 criteria for “Controlled” access and is intended to support the use of a personal identification number (PIN) entered via a keypad and sent directly to a panel or door controller (PIN matched at panel, not on card). To be used in combination with HID Global’s pivCLASS Authentication Module (PAM), requires the addition of the contact reader sidecar (available as a kit) and a reconfiguration that can be done in the field. The pivCLASS RK40 supports reading any PIV-based card with a contactless interface and containing a Card Authentication Key (CAK) certificate.

Key Features:

  • Capable of PIN matching at the panel
  • Can be converted into an RKCL40 reader with the addition of a sidecar
  • Supports reading legacy cards such as iCLASS, iCLASS SE and standard Prox
  • Technical specification

    Typical Maximum Read Range* Up to 2” for ISO14443 A cards

    * Depending upon environmental factors

    Dimensions 3.3” x 4.8” x 1.1” (8.5 x 12.2 x 2.8 cm)
    Legacy cards supported Proximity: HID Prox, AWID and EM4102
    13.56 MHz contactless smart cards supported
  • PKI-based FIPS 201 credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC
  • iCLASS SE, iCLASS SR, standard iCLASS, SE for MIFARE Classic, SE for MIFARE DESFire EV1
  • Supported outputs in Wiegand mode
  • 40 bits
  • 40 bits
  • 75 bit GSA
  • 128 bit UUIDs
  • 200 bits full FASCN
  • Protocol Wiegand mode – Wiegand

    PAM mode – HID Global pivCLASS protocol or CoreStreet Reader Protocol

    Warranty Lifetime