Език / Language

EDGEReader® Solo ESR40 83120

The HID EDGEReader® Solo IP Access Solution puts control and user interface at the door -- right inside the reader.

The EDGEReader Solo ESR40 is a cost-effective, stand-alone, single-door IP access control solution. This easy-to-use solution enables remote management and report generation via standard web browser. User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. Providing "Intelligence to the Door", the flexible EDGEReader Solo ESR40 includes an integrated iCLASS® reader. And the EDGEReader Solo ESR40 IP Access Solution can be converted from stand-alone operation to a system reader for a host environment quickly and easily through the web browser. There is never a need to go to the door.

  • Simplicity
    Control functions for a single door and HID iCLASS reader in one device with the same footprint as a traditional reader
  • Management
    Remotely managed over the network via standard web browser
  • Real Cost Savings
    Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies Established Open Architecture - Built on the HID OPIN™ platform, can be remotely reconfigured to a system reader in a host environment

Technical specification

Dimensions: 3.3" W x 4.8" H x 2.3" D (83.8 mm x 121.9 mm x 57.9 mm)
Weight:14.7 oz (.400 kg)
Card Data Formats:Supports any card data format up to 128 bits
Hardware:32-bit RISC CPU, 100 MHz processor
Memory:8 MB onboard Flash memory, 32 MB SDRAM, 256K SRAM
Visual Indicators:Two LEDs indicate power/network activity and device I/O activity.
Power Supply Requirements:1 A @ 12-16 VDC maximum
  • Recommended: Power is supplied using the Power over Ethernet technology available with PoE (802.3af ) enabled network devices.
  • Alternate: Supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
  • Relays can be configured to supply power as follows:
  • Available Power: The EdgeReader is capable of supplying a total of 600 mA to field devices. Unpowered, relay contacts are rated for 2 A @ 30 VDC
  • Note: Use of a Listed Access Control / Burglary power-limited power supply is required for all Listed installations.
Operating Temperature:32° to 122° F (0° to 50° C)
Operating Humidity:5% to 95% relative, non-condensing
Communication Ports: Ethernet 10 or 100 Mbps
Certifications:UL 294 Listed Component, CSA 205 for Canada, FCC Class A Verification (FCC and Industry Canada Certification for Reader only), ICES-003 Class A Canada, EU (CE Marking), Australia (C-Tick Mark), New Zealand